Aluminium Titanium Nitride Coating
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S225_ANGLE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S225_ANGLE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S225_DIM.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S225_SIDE.png)
![undefined](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/S225_FRONT6.png)
![S22514.0](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/logo/DORMER_RED.png)
S22514.0
Finishing End Mill
Ordering number: 6706805
Short series finishing end mill with 6 flutes, diameter 14mm with 30mm length of cut, 90mm overall length and 44mm reach with neck relief, according to DORMER standard with a 14mm plain shank, solid carbide with AlTiN coating, 50° helix and 3° rake angle for shoulder milling in martensitic, austenitic and super-austenitic, Duplex or precipitation hardening stainless steel and high-temperature alloys
Product Feature
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_COATING_ALTIN.png)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BMC_HM.png)
Hard Material (Solid Carbide)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_MILLPROFILE_N.png)
General Purpose Cutter Type for Low to High Resistance Materials
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_MILLLENGTH_S.png)
Cut Length, Short
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_FLUTEHELIXANGLE_50.png)
50° Helix Angle (Flute)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_SHANK_ZYL_DIN6535HA.png)
DIN 6535 HA Cylindrical Shank
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_TCDC_H9.png)
h9 – Industry Standard Tool Tolerance Zone (based on diameter range)
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_MILLDIRECTION_TYPE3.png)
Radial
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_BSG_DORMER.png)
Dormer Standards
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IR_TEETH_Z6.png)
Number of Flutes = 6 (teeth)
Product Operation
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_OP_LOWSHOULDERMILLING.png)
Shallow Shoulder Milling - Primary use
![](https://5wyuco84ao39w9tsgkkmnmx.blob.core.windows.net/assetshandover/wex_standard/IC_OP_DEEPSHOULDERMILLING_G.png)
Deep Shoulder Milling - Possible use
Product Detail
Description | Value |
---|---|
EAN number | 7320760683545 |
EDP number | 46706805 |
Product name | S22514.0 |
Ordering code ANSI | S22514.0 |
Gross weight - grams | 178 |
Cutting diameter - millimeter (DC) | 14 mm |
Connection diameter - millimeter (DCON MS) | 14 mm |
Depth of cut maximum - millimeter (APMX) | 30 mm |
Overall length - millimeter (OAL) | 90 mm |
Flute count (NOF) | 6 |
Usable Length - millimeter (LU) | 44 mm |
Neck diameter - millimeter (DN) | 13 mm |
Radial rake angle (GAMF) | 3 |
With Neck | Yes |
ANSI | S22514.0 |
ISO | S22514.0 |
Cutting Conditions
Suitability | vc | f | |
---|---|---|---|
P4.3 - Tool steel with a hardness of 39 - 45HRC | Primary use | 262 ft/min | 0.0014 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB | Primary use | 262 ft/min | 0.0014 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB | Primary use | 269 ft/min | 0.0011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB | Primary use | 262 ft/min | 0.0011 inch/rev |
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB | Primary use | 223 ft/min | 0.0011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S1.3 - Titanium alloys, a hardness of 280 - 360HB | Primary use | 190 ft/min | 0.0011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S2.2 - High-temperature Fe-based alloys with a hardness of 200-280HB | Primary use | 154 ft/min | 0.0011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S3.2 - High-temperature Ni-based alloys with a hardness of 280 - 360HB | Primary use | 108 ft/min | 0.0011 inch/rev |
Suitability | vc | f | |
---|---|---|---|
S4.2 - High-temperature Co-based alloys with a hardness of 240 - 320HB | Primary use | 89 ft/min | 0.0011 inch/rev |