USA-English (EN_US)
S63710.0

S63710.0

End Mill
Ordering number: 6706878

Short series end mill with 1 flute, diameter 10mm with 25mm length of cut and 72mm overall length, according to DORMER standard with a 10mm plain shank, solid carbide with polished finish, 25° helix and 20° rake angle for slot milling in non-ferrous metals

info If you want to see the prices or stock information, please sign in or request access.
Sign in to add to wish list

Product Feature

Polished Bright Surface Finish

Hard Material (Solid Carbide)

Non-ferrous Cutter Type for Soft Malleable Materials

Cut Length, Short

25° Helix Angle (Flute)

DIN 6535 HA Cylindrical Shank

h9 – Industry Standard Tool Tolerance Zone (based on diameter range)

Radial, Diagonal, Axial

Dormer Standards

Number of Flutes = 1 (single tooth)

Product Operation

Shallow Slot Milling - Primary use

Product Detail

Description
Value
EAN number7320760684276
EDP number46706878
Product nameS63710.0
Ordering code ANSIS63710.0
Gross weight - grams71
Cutting diameter - millimeter (DC)10 mm
Connection diameter - millimeter (DCON MS)10 mm
Depth of cut maximum - millimeter (APMX)25 mm
Overall length - millimeter (OAL)72 mm
Flute count (NOF)1
Radial rake angle (GAMF)20
With NeckYes
ANSIS63710.0
ISOS63710.0

Cutting Conditions

Suitability vcf
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB
help_outline
Primary use
2326 ft/min 0.0085 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB
help_outline
Primary use
1749 ft/min 0.0085 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB
help_outline
Primary use
1171 ft/min 0.0085 inch/rev
Suitability vcf
N2.1 - Cast aluminium alloys with a hardness of < 75HB
help_outline
Primary use
1171 ft/min 0.0078 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB
help_outline
Primary use
1050 ft/min 0.0078 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB
help_outline
Primary use
751 ft/min 0.0078 inch/rev
Suitability vcf
N3.1 - Free-cutting copper-alloys materials with excellent machining properties
help_outline
Primary use
1224 ft/min 0.0078 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties
help_outline
Primary use
719 ft/min 0.0078 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties
help_outline
Primary use
367 ft/min 0.0078 inch/rev
Suitability vcf
N4.1 - Thermoplastic polymers
help_outline
Primary use
1224 ft/min 0.0125 inch/rev
N4.2 - Thermosetting polymers
help_outline
Primary use
472 ft/min 0.0125 inch/rev