R4593.0

Force X Drill Oil Feed 8×D
Ordering number: 6718973

High-performance FORCE X drill with DIN 6535HA NC parallel shank, diameter 3mm with an overall length of 79mm and flute length of 37mm according to DORMER standard with 140° modified 4-facet split point, solid carbide with TiAlN coating, continiously thinned parallel web and through coolant holes for 8xD drilling without pecking in steel, stainless steel and cast iron

info

If you want to see the prices or stock information, please sign in or request access.

Contact Sales

location_on

Find a Distributor

Product Feature

Titanium Aluminium Nitride Coating

Hard Material (Solid Carbide)

Dormer Standards

8×D Usable Tool Depth to Diameter Ratio

Drill Point 140°

DIN 6535 HA Cylindrical Shank

Continuously Thinned Web Flute Design

Through Tool Coolant

m7 – Industry Standard Tool Tolerance Zone (based on diameter range)

Product Detail

Description	Value
EAN number	7320760685891
EDP number	46718973
Product name	R4593.0
Ordering code ANSI	R4593.0
Product Line	FORCE X
Gross weight - grams	19.6
Cutting diameter - millimeter (DC)	3 mm
Cutting diameter - inch (DC)	0.1181 inch
Length chip flute - millimeter (LCF)	37 mm
Overall length - millimeter (OAL)	79 mm
Shank length - millimeter (LS)	36 mm
Connection diameter - millimeter (DCON MS)	6 mm
Length chip flute - inch (LCF)	1.4567 inch
ANSI	R4593.0
ISO	R4593.0

Cutting Conditions

P - Steel and cast steel (steels with alloy content ≤ 10% and a hardness of < 45HRC)

P1

P1 - Free machining steel (carbon steels with increased machinability)

navigate_next

	Suitability	v_c	f
P1.1 - Free machining sulfurized carbon steel with a hardness of < 240HB	help_outline Primary use	469 ft/min	0.0039 inch/rev
P1.2 - Free machining sulfurized and phosphorized carbon steel with a hardness of < 180HB	help_outline Primary use	525 ft/min	0.0039 inch/rev
P1.3 - Free machining sulfurized/phosphorized and leaded carbon steel with a hardness of < 180HB	help_outline Primary use	545 ft/min	0.0039 inch/rev

P2

P2 - Plain carbon steel (steels comprised of mainly iron and carbon)

navigate_next

	Suitability	v_c	f
P2.1 - Plain low carbon steel containing < 0.25%C with a hardness of < 180HB	help_outline Primary use	400 ft/min	0.0039 inch/rev
P2.2 - Plain medium carbon steel containing < 0.55%C with a hardness of < 240HB	help_outline Primary use	354 ft/min	0.0028 inch/rev
P2.3 - Plain high carbon steel containing > 0.55%C, with a hardness of < 300HB	help_outline Primary use	312 ft/min	0.0028 inch/rev

P3

P3 - Alloy steel (carbon steels with an alloying content ≤ 10%)

navigate_next

	Suitability	v_c	f
P3.1 - Alloy steel with a hardness of < 180HB	help_outline Primary use	348 ft/min	0.0028 inch/rev
P3.2 - Alloy steel with a hardness of 180 - 260HB	help_outline Primary use	282 ft/min	0.0028 inch/rev
P3.3 - Alloy steel with a hardness of 260 - 360HB	help_outline Primary use	236 ft/min	0.0028 inch/rev

P4

P4 - Tool steel (special alloy steel for tools, dies and molds)

navigate_next

	Suitability	v_c	f
P4.1 - Tool steel with a hardness of < 26HRC	help_outline Primary use	207 ft/min	0.0028 inch/rev
P4.2 - Tool steel with a hardness of 26 - 39RC	help_outline Primary use	177 ft/min	0.0028 inch/rev
P4.3 - Tool steel with a hardness of 39 - 45HRC	help_outline Primary use	144 ft/min	0.0016 inch/rev

M - Stainless steel (corrosion resistant steels with ≥ 11% chromium content)

M1

M1 - Ferritic stainless steel (straight chromium non-hardenable alloys)

navigate_next

	Suitability	v_c	f
M1.1 - Stainless steel, ferritic with a hardness of < 160HB	help_outline Possible use	197 ft/min	0.0039 inch/rev
M1.2 - Stainless steel, ferritic with a hardness of 160 - 220HB	help_outline Possible use	167 ft/min	0.0039 inch/rev

M2

M2 - Martensitic stainless steel (straight chromium hardenable alloys)

navigate_next

	Suitability	v_c	f
M2.1 - Stainless steel, martensitic with a hardness of < 200HB	help_outline Possible use	177 ft/min	0.0039 inch/rev
M2.2 - Stainless steel, martensitic with a hardness of 200 - 280HB	help_outline Possible use	144 ft/min	0.0039 inch/rev
M2.3 - Stainless steel, martensitic with a hardness of 280 - 380HB	help_outline Possible use	121 ft/min	0.0028 inch/rev

M3

M3 - Austenitic stainless steel (chromium-nickel and chromium-nickel-manganese alloys)

navigate_next

	Suitability	v_c	f
M3.1 - Stainless steel, austenitic with a hardness of < 200HB	help_outline Possible use	108 ft/min	0.0039 inch/rev
M3.2 - Stainless steel, austenitic with a hardness of 200 - 260HB	help_outline Possible use	92 ft/min	0.0039 inch/rev
M3.3 - Stainless steel, austenitic with a hardness of 260 - 300HB	help_outline Possible use	85 ft/min	0.0039 inch/rev

M4

M4 - Super-austenitic, Duplex or Precipitation Hardening stainless steel (austenitic alloys with > 20% Ni, austenitic-ferritic microstructure or precipitation hardened)

navigate_next

	Suitability	v_c	f
M4.1 - Stainless steel, austenitic-ferritic or super-austenitic with a hardness of < 300HB	help_outline Possible use	79 ft/min	0.0028 inch/rev
M4.2 - Stainless steel, precipitation hardening austenitic with a hardness of 300 - 380HB	help_outline Possible use	69 ft/min	0.0028 inch/rev

K - Cast Iron (castings of iron and carbon alloys with > 2% carbon content)

K1

K1 - Gray iron (GG) (iron-carbon castings with a lamellar graphite microstructure)

navigate_next

	Suitability	v_c	f
K1.1 - Gray iron, ferritic or ferritic-pearlitic with a hardness of < 180HB	help_outline Primary use	289 ft/min	0.0051 inch/rev
K1.2 - Gray iron, ferritic-pearlitic or pearlitic with a hardness of 180 - 240HB	help_outline Primary use	213 ft/min	0.0051 inch/rev
K1.3 - Gray iron, pearlitic with a hardness of 240 - 280HB	help_outline Primary use	161 ft/min	0.0051 inch/rev

K2

K2 - Malleable iron (GTS/GTW) (heat-treated iron-carbon castings with a graphite-free microstructure)

navigate_next

	Suitability	v_c	f
K2.1 - Malleable iron, ferritic with a hardness of < 160HB	help_outline Primary use	256 ft/min	0.0039 inch/rev
K2.2 - Malleable iron, ferritic or pearlitic with a hardness of 160 - 200HB	help_outline Primary use	210 ft/min	0.0039 inch/rev
K2.3 - Malleable iron, pearlitic with a hardness of 200 - 240HB	help_outline Primary use	167 ft/min	0.0039 inch/rev

K3

K3 - Ductile iron (GGG) (iron-carbon castings with a nodular graphite microsturcture)

navigate_next

	Suitability	v_c	f
K3.1 - Ductile (nodular/spheriodal) iron, ferritic with a hardness of < 180HB	help_outline Primary use	230 ft/min	0.0039 inch/rev
K3.2 - Ductile (nodular/spheriodal) iron, ferritic or pearlitic with a hardness of 180 - 220HB	help_outline Primary use	177 ft/min	0.0039 inch/rev
K3.3 - Ductile (nodular/spheriodal) iron, pearlitic with a hardness of 220 - 260HB	help_outline Primary use	141 ft/min	0.0039 inch/rev

K4

K4 - Austenitic or austempered ductile iron (Ni-Resist/ADI) (iron-carbon alloy castings with an austenitic or ausferrite microstructure)

navigate_next

	Suitability	v_c	f
K4.1 - Austenitic cast iron with a hardness of < 180HB	help_outline Primary use	213 ft/min	0.0039 inch/rev
K4.2 - Austenitic cast iron with a hardness of 180 - 240HB	help_outline Primary use	161 ft/min	0.0039 inch/rev
K4.3 - Austempered ductile iron with a hardness of 240 - 280HB	help_outline Primary use	118 ft/min	0.0039 inch/rev
K4.4 - Austempered ductile iron with a hardness of 280 - 320HB	help_outline Primary use	98 ft/min	0.0039 inch/rev
K4.5 - Austempered ductile iron with a hardness of 320 - 360HB	help_outline Primary use	85 ft/min	0.0039 inch/rev

K5

K5 - Compacted graphite iron (CGI) (iron-carbon castings with a vermicular graphite structure)

navigate_next

	Suitability	v_c	f
K5.1 - Vermicular, compacted graphite iron with a hardness of < 180HB	help_outline Primary use	240 ft/min	0.0039 inch/rev
K5.2 - Vermicular, compacted graphite iron with a hardness of 180 - 220HB	help_outline Primary use	180 ft/min	0.0039 inch/rev
K5.3 - Vermicular, compacted graphite iron with a hardness of 220 - 260HB	help_outline Primary use	138 ft/min	0.0039 inch/rev

N - Non-ferrous metals (metals including alloys without an appreciable amount of iron)

N1

N1 - Wrought aluminium

navigate_next

	Suitability	v_c	f
N1.1 - Pure aluminium and wrought aluminium alloys with a hardness of < 60HB	help_outline Possible use	656 ft/min	0.0051 inch/rev
N1.2 - Wrought aluminium alloys with a hardness of 60 - 100HB	help_outline Possible use	492 ft/min	0.0051 inch/rev
N1.3 - Wrought aluminium alloys with a hardness of 100 - 150HB	help_outline Primary use	328 ft/min	0.0051 inch/rev

N2

N2 - Cast aluminium

navigate_next

	Suitability	v_c	f
N2.1 - Cast aluminium alloys with a hardness of < 75HB	help_outline Primary use	807 ft/min	0.0039 inch/rev
N2.2 - Cast aluminium alloys with a hardness of 75 - 90HB	help_outline Primary use	728 ft/min	0.0039 inch/rev
N2.3 - Cast aluminium alloys with a hardness of 90 < 140HB	help_outline Primary use	525 ft/min	0.0039 inch/rev

N3

N3 - Copper or copper alloys

navigate_next

	Suitability	v_c	f
N3.1 - Free-cutting copper-alloys materials with excellent machining properties	help_outline Possible use	978 ft/min	0.0039 inch/rev
N3.2 - Short-chip copper-alloys with good to moderate machining properties	help_outline Possible use	577 ft/min	0.0039 inch/rev
N3.3 - Electrolytic copper and long-chip copper-alloys with moderate to poor machining properties	help_outline Possible use	289 ft/min	0.0039 inch/rev

Downloads

R4593_0_6718973_3D

stp

Download