DCGT 32.50.5F-AL:HF7
Turning Insert - Positive
Ordering number: 6752066
Single-sided positive turning insert, 55° rhomboid with 7° clearance, inscribed circle diameter of 3/8", 5/32" thick, 1/128" nose radius, indexing accuracy according to ISO-tolerance class- G, , chip-breaker AL with sharp cutting edges, in grade HF7, an uncoated fine grained WC-Co carbide within ISO range N10-N25, for fine to heavy machining of non-ferrous metals
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602874320 |
| EDP number | 6752066 |
| Product name | DCGT 11T302F-AL:HF7 |
| Ordering code ANSI | DCGT 32.50.5F-AL:HF7 |
| Gross weight - grams | 4.948 |
| Inscribed circle diameter - inch (IC) | 0.375 inch |
| Inscribed circle diameter - millimeter (IC) | 9.525 mm |
| Fixing hole diameter - inch (D1) | 0.173 inch |
| Fixing hole diameter - millimeter (D1) | 4.4 mm |
| Cutting edge length - inch (L) | 0.457 inch |
| Cutting edge length - millimeter (L) | 11.6 mm |
| Insert thickness - inch (S) | 0.156 inch |
| Insert thickness - millimeter (S) | 3.97 mm |
| Grade | HF7 |
| Corner radius - inch (RE) | 0.008 inch |
| Corner radius - millimeter (RE) | 0.2 mm |
| Insert Clearance Code and Angle | C 7° |
| Insert Design | DCGT |
| Insert size | 11 |
| Insert Thickness | T3 |
| Insert Type | T |
| Chipbreaker manufacturer's designation (CBMD) | AL |
| Insert shape code (SC) | D - rhombic 55° included angle |
| Tool Design | DC |
| Insert Geometry | Positive |
| ANSI | DCGT32.50.5F-AL:HF7 |
| ISO | DCGT11T302F-AL:HF7 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.012 - 0.13 inch | 509 - 1657 ft/min | 0.0024 - 0.0047 inch/rev |