XPHT 160408F-FA:HF7
Milling Insert - Chamfering
Ordering number: 6752075
Single-sided milling insert XPHT 1604 with chip-breakers, special shape for a maximum depth of cut of .5906", with .0315" corner radius, an indexing accuracy according to ISO-tolerance class-H and FA geometry with sharp cutting edges, HF7 uncoated fine grained WC-Co carbide within ISO-grade range N10-N25 for machining of non-ferrous metal
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602874412 |
| EDP number | 6752075 |
| Product name | XPHT 160408F-FA:HF7 |
| Ordering code ANSI | XPHT 160408F-FA:HF7 |
| Gross weight - grams | 6.946 |
| Insert width - inch (W1) | 0.375 inch |
| Insert width - millimeter (W1) | 9.525 mm |
| Fixing hole diameter - inch (D1) | 0.173 inch |
| Fixing hole diameter - millimeter (D1) | 4.4 mm |
| Cutting edge length - inch (L) | 0.625 inch |
| Cutting edge length - millimeter (L) | 15.88 mm |
| Insert thickness - inch (S) | 0.187 inch |
| Insert thickness - millimeter (S) | 4.76 mm |
| Grade | HF7 |
| Corner radius - inch (RE) | 0.031 inch |
| Corner radius - millimeter (RE) | 0.8 mm |
| Insert Clearance Code and Angle | P 11° |
| Insert size | 16 |
| Insert Type | T |
| Insert shape code (SC) | X - Special design |
| ANSI | XPHT160408F-FA:HF7 |
| ISO | XPHT160408F-FA:HF7 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.031 - 0.591 inch | 344 - 1378 ft/min | 0.002 - 0.0142 inch/tooth |