SNMM 866-SR:6630
Turning Insert - Negative
Ordering number: 6752129
Double-sided negative turning insert, square with inscribed circle diameter of 1", 3/8" thick, 3/32" nose radius and indexing accuracy according to ISO-tolerance class- M, chip-breaker SR, in grade 6630, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15 - P35, for heavy to extra heavy machining of steels
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602874955 |
| EDP number | 6752129 |
| Product name | SNMM 250924S-SR:6630 |
| Ordering code ANSI | SNMM 866-SR:6630 |
| Gross weight - grams | 69.708 |
| Inscribed circle diameter - inch (IC) | 1 inch |
| Inscribed circle diameter - millimeter (IC) | 25.4 mm |
| Fixing hole diameter - inch (D1) | 0.359 inch |
| Fixing hole diameter - millimeter (D1) | 9.12 mm |
| Cutting edge length - inch (L) | 1 inch |
| Cutting edge length - millimeter (L) | 25.4 mm |
| Insert thickness - inch (S) | 0.375 inch |
| Insert thickness - millimeter (S) | 9.525 mm |
| Grade | 6630 |
| Corner radius - inch (RE) | 0.094 inch |
| Corner radius - millimeter (RE) | 2.4 mm |
| Insert Clearance Code and Angle | N 0° |
| Insert Design | SNMM |
| Insert size | 25 |
| Insert Thickness | 09 |
| Insert Type | M |
| Chipbreaker manufacturer's designation (CBMD) | SR |
| Insert shape code (SC) | S - square |
| Tool Design | SN |
| Insert Geometry | Negative |
| ANSI | SNMM866-SR:6630 |
| ISO | SNMM250924S-SR:6630 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.197 - 0.63 inch | 197 - 279 ft/min | 0.0276 - 0.052 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.197 - 0.63 inch | 115 - 164 ft/min | 0.0303 - 0.0468 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.197 - 0.63 inch | 180 - 262 ft/min | 0.0276 - 0.052 inch/rev |