WNXJ 201380-PR-S01:6630
Bar Peeling Insert
Ordering number: 6752844
Double-sided negative barpeeling insert, 80° trigon with inscribed circle diameter of 31.75mm, 13mm thick for 8mm depth of cut,, chip-breaker PR with S01 cutting edge preperation, in grade 6630, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15-P35, for high strength steels
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602882103 |
| EDP number | 6752844 |
| Product name | WNXJ 201380-PR-S01:6630 |
| Ordering code ANSI | WNXJ 201380-PR-S01:6630 |
| Gross weight - grams | 170.467 |
| Cutting edge length - inch (L) | 0.787 inch |
| Cutting edge length - millimeter (L) | 20 mm |
| Insert thickness - inch (S) | 0.512 inch |
| Insert thickness - millimeter (S) | 13 mm |
| Depth of cut maximum - inch (APMX) | 0.315 inch |
| Depth of cut maximum - millimeter (APMX) | 8 mm |
| Major cutting edge angle (KRINS) | 25 |
| Inscribed circle diameter - inch (IC) | 1.25 inch |
| Inscribed circle diameter - millimeter (IC) | 31.75 mm |
| Insert included angle (EPSR) | 85 |
| Wiper edge length - inch (BS) | 0.591 inch |
| Wiper edge length - millimeter (BS) | 15 mm |
| Grade | 6630 |
| Cutting depth - minimal - milimeters (ap) | 1 mm |
| Cutting depth - maximal - milimeters (ap) | 8 mm |
| Feed maximal - millimeter | 12 mm/rev |
| Insert Clearance Code and Angle | N 0° |
| Insert Design | WNXJ |
| Insert size | 20 |
| Insert Thickness | 13 |
| Insert Type | J |
| Chipbreaker manufacturer's designation (CBMD) | PR-S01 |
| Insert shape code (SC) | W - trigon |
| Fixing hole diameter - inch (D1) | 0.359 inch |
| Fixing hole diameter - millimeter (D1) | 9 mm |
| ANSI | WNXJ201380-PR-S01:6630 |
| ISO | WNXJ201380-PR-S01:6630 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.039 - 0.315 inch | 131 - 394 ft/min | 0.0472 - 0.4724 inch/rev |