SNMX 251224S-SR:T8345
Turning Insert - Heavy Duty and Railway
Ordering number: 6753687
Special design negative turning insert, square with inscribed circle diameter of 25.4mm, 12mm thick, 2.4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker SR with rounded cutting edges with facet, in grade T8345, a PVD coated fine grained WC-Co carbide within ISO range M20-M40, for heavy to extra heavy machining of stainless-steels
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602890535 |
| EDP number | 6753687 |
| Product name | SNMX 251224S-SR:T8345 |
| Ordering code ANSI | SNMX 251224S-SR:T8345 |
| Gross weight - grams | 96.64 |
| Inscribed circle diameter - inch (IC) | 1 inch |
| Inscribed circle diameter - millimeter (IC) | 25.4 mm |
| Fixing hole diameter - inch (D1) | 0.361 inch |
| Fixing hole diameter - millimeter (D1) | 9.17 mm |
| Cutting edge length - inch (L) | 1 inch |
| Cutting edge length - millimeter (L) | 25.4 mm |
| Insert thickness - inch (S) | 0.472 inch |
| Insert thickness - millimeter (S) | 12 mm |
| Grade | T8345 |
| Corner radius - inch (RE) | 0.094 inch |
| Corner radius - millimeter (RE) | 2.4 mm |
| Insert Clearance Code and Angle | N 0° |
| Insert Design | SNMX |
| Insert size | 25 |
| Insert Thickness | 12 |
| Insert Type | X |
| Chipbreaker manufacturer's designation (CBMD) | SR |
| Insert shape code (SC) | S - square |
| Tool Design | SN |
| Insert Geometry | Negative |
| ANSI | SNMX251224S-SR:T8345 |
| ISO | SNMX251224S-SR:T8345 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.197 - 0.63 inch | 131 - 180 ft/min | 0.0276 - 0.052 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.197 - 0.63 inch | 66 - 98 ft/min | 0.0303 - 0.0468 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.197 - 0.63 inch | 115 - 164 ft/min | 0.0276 - 0.052 inch/rev |