SNMM 856-OR:T8345
Turning Insert - Negative
Ordering number: 6753691
Double-sided negative turning insert, square with inscribed circle diameter of 1", 5/16" thick, 3/32" nose radius and indexing accuracy according to ISO-tolerance class- M, chip-breaker OR, in grade T8345, a PVD coated fine grained WC-Co carbide within ISO range P30 - P50, for medium to extra heavy machining of steels
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602890573 |
| EDP number | 6753691 |
| Product name | SNMM 250724E-OR:T8345 |
| Ordering code ANSI | SNMM 856-OR:T8345 |
| Gross weight - grams | 59.241 |
| Inscribed circle diameter - inch (IC) | 1 inch |
| Inscribed circle diameter - millimeter (IC) | 25.4 mm |
| Fixing hole diameter - inch (D1) | 0.359 inch |
| Fixing hole diameter - millimeter (D1) | 9.12 mm |
| Cutting edge length - inch (L) | 1 inch |
| Cutting edge length - millimeter (L) | 25.4 mm |
| Insert thickness - inch (S) | 0.313 inch |
| Insert thickness - millimeter (S) | 7.94 mm |
| Grade | T8345 |
| Corner radius - inch (RE) | 0.094 inch |
| Corner radius - millimeter (RE) | 2.4 mm |
| Insert Clearance Code and Angle | N 0° |
| Insert Design | SNMM |
| Insert size | 25 |
| Insert Thickness | 07 |
| Insert Type | M |
| Chipbreaker manufacturer's designation (CBMD) | OR_ |
| Insert shape code (SC) | S - square |
| Tool Design | SN |
| Insert Geometry | Negative |
| ANSI | SNMM856-OR:T8345 |
| ISO | SNMM250724E-OR:T8345 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.157 - 0.63 inch | 164 - 262 ft/min | 0.0177 - 0.052 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.157 - 0.63 inch | 98 - 148 ft/min | 0.0177 - 0.0468 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.157 - 0.63 inch | 148 - 246 ft/min | 0.0177 - 0.052 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.157 - 0.504 inch | 33 - 66 ft/min | 0.0177 - 0.0364 inch/rev |