WNMG 433-M:T9315
Turning Insert - Negative
Ordering number: 6753757
Double-sided negative turning insert, 80° trigon with inscribed circle diameter of 1/2", 3/16" thick, 3/64" nose radius and indexing accuracy according to ISO-tolerance class- M, chip-breaker M, in grade T9315, a MT-CVD coated functionally graded WC-Co carbide within ISO range P05-P25, for fine to heavy machining of steels
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602891235 |
| EDP number | 6753757 |
| Product name | WNMG 080412E-M:T9315 |
| Ordering code ANSI | WNMG 433-M:T9315 |
| Gross weight - grams | 9.34 |
| Inscribed circle diameter - inch (IC) | 0.5 inch |
| Inscribed circle diameter - millimeter (IC) | 12.7 mm |
| Fixing hole diameter - inch (D1) | 0.203 inch |
| Fixing hole diameter - millimeter (D1) | 5.16 mm |
| Cutting edge length - inch (L) | 0.343 inch |
| Cutting edge length - millimeter (L) | 8.7 mm |
| Insert thickness - inch (S) | 0.187 inch |
| Insert thickness - millimeter (S) | 4.76 mm |
| Grade | T9315 |
| Corner radius - inch (RE) | 0.047 inch |
| Corner radius - millimeter (RE) | 1.2 mm |
| Insert Clearance Code and Angle | N 0° |
| Insert Design | WNMG |
| Insert size | 08 |
| Insert Thickness | 04 |
| Insert Type | G |
| Chipbreaker manufacturer's designation (CBMD) | M |
| Insert shape code (SC) | W - trigon |
| Tool Design | WN |
| Insert Geometry | Negative |
| ANSI | WNMG433-M:T9315 |
| ISO | WNMG080412E-M:T9315 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.047 - 0.22 inch | 492 - 1066 ft/min | 0.0067 - 0.0307 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.047 - 0.22 inch | 459 - 1001 ft/min | 0.0067 - 0.0307 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.024 - 0.059 inch | 98 - 213 ft/min | 0.0043 - 0.0154 inch/rev |