LCMF 0313MO-MP:T8330
Turning Insert - Parting and Grooving
Ordering number: 6754265
Double ended parting and grooving insert, 12.6mm long with a 3mm cutting width and 1.5mm full radius, an accuracy according to tolerance class-M and chip-breaker MP, grade T8330 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40 and K20-K40 for machining of steel and cast-iron in combination with DORMER PRAMET GF..(RL) 0313 and GG..(RL) 0313 parting and grooving tools
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602896315 |
| EDP number | 6754265 |
| Ordering code ANSI | LCMF 0313MO-MP:T8330 |
| Gross weight - grams | 1.501 |
| Cutting width - inch (CW) | 0.118 inch |
| Cutting width - millimeter (CW) | 3 mm |
| Cutting width lower tolerance - inch (CWTOLL) | -0.002 inch |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.05 mm |
| Cutting width upper tolerance - inch (CWTOLU) | 0.002 inch |
| Cutting width upper tolerance - millimeter (CWTOLU) | 0.05 mm |
| Insert length - inch (INSL) | 0.496 inch |
| Insert length - millimeter (INSL) | 12.6 mm |
| Grade | T8330 |
| Corner radius - inch (RE) | 0.059 inch |
| Corner radius - millimeter (RE) | 1.5 mm |
| Insert Design | LCMF 13 |
| Chipbreaker manufacturer's designation (CBMD) | MP |
| Primary Tool Lead Angle | Neutral |
| Insert Type | F |
| ANSI | LCMF0313MO-MP:T8330 |
| ISO | LCMF0313MO-MP:T8330 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.02 - 0.059 inch | 541 - 1099 ft/min | 0.002 - 0.0157 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.02 - 0.059 inch | 312 - 656 ft/min | 0.0022 - 0.0142 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.02 - 0.059 inch | 509 - 1033 ft/min | 0.002 - 0.0157 inch/rev |