LCMF 051608-M:T8330
Turning Insert - Parting and Grooving
Ordering number: 6754311
Double ended parting and grooving insert, 16.4mm long with a 5mm cutting width and 0.8mm corner radii, an accuracy according to tolerance class-M and chip-breaker M, grade T8330 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40 and K20-K40 for machining of steel and cast-iron in combination with DORMER PRAMET GF..(RL) 05 and XLCCN 0516 parting and grooving tools
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602896773 |
| EDP number | 6754311 |
| Ordering code ANSI | LCMF 051608-M:T8330 |
| Gross weight - grams | 4.856 |
| Cutting width - inch (CW) | 0.197 inch |
| Cutting width - millimeter (CW) | 5 mm |
| Cutting width lower tolerance - inch (CWTOLL) | -0.002 inch |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.05 mm |
| Cutting width upper tolerance - inch (CWTOLU) | 0.002 inch |
| Cutting width upper tolerance - millimeter (CWTOLU) | 0.05 mm |
| Insert length - inch (INSL) | 0.646 inch |
| Insert length - millimeter (INSL) | 16.4 mm |
| Grade | T8330 |
| Corner radius - inch (RE) | 0.031 inch |
| Corner radius - millimeter (RE) | 0.8 mm |
| Insert Design | LCMF 16, LCMF 30 |
| Chipbreaker manufacturer's designation (CBMD) | M |
| Primary Tool Lead Angle | Neutral |
| Insert Type | F |
| ANSI | LCMF051608-M:T8330 |
| ISO | LCMF051608-M:T8330 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.02 - 0.098 inch | 427 - 640 ft/min | 0.0071 - 0.0169 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.02 - 0.098 inch | 246 - 377 ft/min | 0.0071 - 0.0152 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | 0.02 - 0.098 inch | 394 - 607 ft/min | 0.0071 - 0.0169 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | 0.016 - 0.059 inch | 82 - 115 ft/min | 0.0047 - 0.011 inch/rev |