LFUX 040800TR:T8330
Turning Insert - Parting and Grooving
Ordering number: 6754330
Single ended parting and grooving insert, with a 4mm cutting width and 0.2mm corner radii, 5° front angle to reduce pip and burr on the right hand side, an accuracy according to tolerance class-U and cutting edges with facet, grade T8330 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40 and K20-K40 for machining of steel and cast-iron in combination with DORMER PRAMET XLCFN 04 and XLCF(RL) 04 parting and grooving tools
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602896964 |
| EDP number | 6754330 |
| Product name | LFUX 040800TR:T8330 |
| Ordering code ANSI | LFUX 040800TR:T8330 |
| Gross weight - grams | 4.617 |
| Cutting width - inch (CW) | 0.157 inch |
| Cutting width - millimeter (CW) | 4 mm |
| Insert body width - inch (BW) | 0.135 inch |
| Insert body width - millimeter (BW) | 3.44 mm |
| Insert length - inch (INSL) | 0.453 inch |
| Insert length - millimeter (INSL) | 11.5 mm |
| Grade | T8330 |
| Corner radius - inch (RE) | 0.008 inch |
| Corner radius - millimeter (RE) | 0.2 mm |
| Tool lead angle right (PSIRR) | 5 |
| Insert Design | LFUX |
| Chipbreaker manufacturer's designation (CBMD) | With chipbreaker -no designation |
| Primary Tool Lead Angle | Right |
| Insert Type | X |
| ANSI | LFUX040800TR:T8330 |
| ISO | LFUX040800TR:T8330 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | - | 230 - 427 ft/min | 0.0039 - 0.0067 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | - | 213 - 394 ft/min | 0.0039 - 0.0067 inch/rev |