LFMX 4.1-.20SL8M2:T8330
Turning Insert - Parting and Grooving
Ordering number: 6754344
Single ended parting and grooving insert, with a 4.1mm cutting width and 0.2mm corner radii, 8° front angle to reduce pip and burr on the left hand side, an accuracy according to tolerance class-M and chip-breaker M2 with rounded cutting edges with facet, grade T8330 PVD coated fine grained WC-Co carbide within ISO-grade ranges P25-P40 and M20-M35 for machining of steel and stainless-steel in combination with DORMER PRAMET XL.F(NRL) 4.00 parting and grooving tools
Product Detail
Description | Value |
|---|---|
| EAN number | 3603602897107 |
| EDP number | 6754344 |
| Ordering code ANSI | LFMX 4.1-.20SL8M2:T8330 |
| Gross weight - grams | 2.809 |
| Cutting width - inch (CW) | 0.161 inch |
| Cutting width - millimeter (CW) | 4.1 mm |
| Cutting width lower tolerance - inch (CWTOLL) | -0.002 inch |
| Cutting width lower tolerance - millimeter (CWTOLL) | -0.04 mm |
| Cutting width upper tolerance - inch (CWTOLU) | 0.002 inch |
| Cutting width upper tolerance - millimeter (CWTOLU) | 0.04 mm |
| Insert body width - inch (BW) | 0.142 inch |
| Insert body width - millimeter (BW) | 3.6 mm |
| Grade | T8330 |
| Corner radius - inch (RE) | 0.008 inch |
| Corner radius - millimeter (RE) | 0.2 mm |
| Tool lead angle left (PSIRL) | 8 |
| Insert Design | LFMX |
| Chipbreaker manufacturer's designation (CBMD) | M2 |
| Primary Tool Lead Angle | Left |
| Insert Type | X |
| ANSI | LFMX4.1-.20SL8M2:T8330 |
| ISO | LFMX4.1-.20SL8M2:T8330 |
Cutting Conditions
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Primary use | - | 230 - 427 ft/min | 0.0028 - 0.0079 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | - | 131 - 246 ft/min | 0.003 - 0.0071 inch/rev |
| Suitability | ap | vc | f | |
|---|---|---|---|---|
Possible use | - | 213 - 394 ft/min | 0.0028 - 0.0079 inch/rev |