LCMF 061608-F:T9325
Turning Insert - Parting and Grooving
Ordering number: 6754686
Double ended parting and grooving insert, 16.4mm long with a 6mm cutting width and 0.8mm corner radii, an accuracy according to tolerance class-M and chip-breaker F, grade T9325 MT-CVD coated functionally graded WC-Co carbide within ISO-grade ranges P15-P35 and K15-K35 for machining of steel and cast-iron in combination with DORMER PRAMET GF..(RL) 06 and XLCCN 0616 parting and grooving tools
Product Detail
Description | Value |
---|---|
EAN number | 3603602900524 |
EDP number | 6754686 |
Ordering code ANSI | LCMF 061608-F:T9325 |
Gross weight - grams | 5.979 |
Cutting width - inch (CW) | 0.236 inch |
Cutting width - millimeter (CW) | 6 mm |
Cutting width lower tolerance - inch (CWTOLL) | -0.002 inch |
Cutting width lower tolerance - millimeter (CWTOLL) | -0.05 mm |
Cutting width upper tolerance - inch (CWTOLU) | 0.002 inch |
Cutting width upper tolerance - millimeter (CWTOLU) | 0.05 mm |
Insert length - inch (INSL) | 0.646 inch |
Insert length - millimeter (INSL) | 16.4 mm |
Grade | T9325 |
Corner radius - inch (RE) | 0.031 inch |
Corner radius - millimeter (RE) | 0.8 mm |
Insert Design | LCMF 16, LCMF 30 |
Chipbreaker manufacturer's designation (CBMD) | F |
Primary Tool Lead Angle | Neutral |
Insert Type | F |
ANSI | LCMF061608-F:T9325 |
ISO | LCMF061608-F:T9325 |
Cutting Conditions
Suitability | ap | vc | f | |
---|---|---|---|---|
Primary use | 0.031 - 0.118 inch | 574 - 1132 ft/min | 0.0039 - 0.0138 inch/rev |
Suitability | ap | vc | f | |
---|---|---|---|---|
Possible use | 0.031 - 0.118 inch | 344 - 673 ft/min | 0.0043 - 0.0124 inch/rev |
Suitability | ap | vc | f | |
---|---|---|---|---|
Possible use | 0.031 - 0.118 inch | 541 - 1066 ft/min | 0.0039 - 0.0138 inch/rev |